background image

 

������������������������������������

�������

The apparatus is not disconnected from the AC power source so long as 
it is connected to the wall outlet, even if the apparatus itself is turned off. 
To fully insure that the apparatus is indeed fully void of residual power, 
leave  unit  disconnected  from  the  AC  outlet  for  at  least  fifteen  seconds.

1. To ensure the finest performance, please read this manual carefully. Keep it in a safe place for future references.

2. Install your unit in a cool, dry, clean place - away from windows, heat sources, and too much vibration, dust, moisture 

    or cold. Avoid sources of hum ( transformers, motors). To prevent fire or electrical shock, do not expose to rain or 

    water.

3. Do not operate the unit upside-down.

4. Never open the cabinet. If a foreign object drops into the set, contact your dealer.

5. Place the unit in a location with adequate air circulation. Do not interfere with its proper ventilations; this will cause 

    the internal temperature to rise and may result in a failure.

6. Do not use force on switches, knobs or cords. When moving the unit, first turn it off. Then gently disconnect the power 

    plug and the cords connecting to other equipment. Never pull the cord itself. 

7. Do not attempt to clean the unit with chemical solvents: this might damage the finish. Use a clean, dry cloth.

8. Be sure to read the “Troubleshooting” section on common operating errors before concluding that your unit is faulty.

9. This unit consumes a fair amount of power even when the power switch is turned off. We recommend that you unplug 

    the power cord from the wall outlet if the unit is not going to be used for a long period of time. This will save electricity 

    and help prevent fire hazards. To disconnect the cord, pull it out by grasping the plug. Never pull the cord itself. 

10. To prevent lightning damages, pull out the power cord and remove the antenna cable during an electrical storm.

11. The general digital signals may interfere with other equipment such as tuners or receivers. Move the system farther 

     away from such equipment if interference is observed.

12. When positioning your equipment, especially regarding speakers or other accessories, avoid positioning them over 

      areas where they can fall and cause injury to yourself and others.

Note:

Please check the copyright laws in your country before recording from records, compact discs, radio, etc. Recording of 

copyright material may infringe copyright laws. 

 

��������

3

Содержание VHF-3005

















Отзывы: