VocoPro UHF-5816, Руководство пользователя

Страница: 8 / 16

8
Mounting
To install the UHF-5816 to a 19” rack case, complete the steps below .
1 . Attach mounting brackets to the UHF-5816 with the supplied mounting screws .
2 . Align the UHF-5816 with the desired space in rack and slowly slide in, rear panel first .
Note: Depending on your rack case design, it may be necessary to allow for sufficient space for the antennas.
3 . While aligned, use rack case screws in the order shown below to stabilize the UHF-5816 in its space,
using the “X” rotation (numbered below) will ensure even tension and flush alignment .
Note: Do not tighten screws firmly until all screws are in place.
1
2
3
4