VocoPro TabletOke, Руководство пользователя

Страница: 12 / 16

12
Pairing the Microphones
If the microphones experience signal loss or dropouts, the microphones should be re-synced to the receiver. In doing so,
the receiver will automatically change the operational frequency of each mic.
RE-SYNC MICROPHONES WITH NEW CHANNEL
1 . Power receiver on—Press power button once (1x).
2 . Select which Mic channel to be paired.
Note: The flashing receiver LED denotes which Mic channel to be paired
a .) Selecting Mic 1 to pair-
aa.) Press and hold Power/Pair ID button on receiver until the
Mic 1 receiver LED is FLASHING.
b.) Selecting Mic 2 to pair.
bb.) Press and hold Power/Pair ID button on receiver until the
Mic 2 receiver LED is FLASHING.
3 . When desired Mic channel LED, Mic 1 or Mic 2, has been
selected for pairing, turn on either hand-held microphone to
assign the microphone to that Mic channel .
The channel indicator lights on the receiver will then flash and the receiver
will power off. This is normal.
4 . Power the receiver back on and check that the Mic channel LED
is solidly lit on the receiver; this indicates the microphone was
paired successfully .
5 . Repeat steps 2-3 for second microphone.
Notes:
When pairing, only one microphone can be paired at a time.
The receiver WILL shut off when it pairs with a microphone, this is normal.
The receiver will power off if the power button is continued to be pressed
down once the flashing LED has selected CH.A.
CONNECTING VIA BLUETOOTH
1 . Turn on the Bluetooth Function in the source player (i.e.
smartphone, laptop, MP3 player).
2 . On the Source Player, Scan for visible Bluetooth devices.
3 . The TabletOke will show upon the list of visible devices, if within
range .
4 . Select TabletOke to connect.
Note: TabletOke will only connect to A2DP enabled Bluetooth devices.
5 . Any audio from your source player will stream to the TabletOke.
1
4
2
3