Before Gettin Started (cont.)
Installation Environment
Maintenance
1. Water and Moisture - Do not use this unit near water - for example near an aquarium or the like. Damp
basements should also be avoided.
2. Condensation - Internal moisture may form in the following cases:
• Immediately after a heater has been turned on
• In a steamy or very humid room.
• When the unit is suddenly moved from a cold environment to a
warm one
• If moisture forms inside this unit, it should not be operated until
completely dry.
3. Heat - The unit should be situated away from heat sources such as
radiators and the like. It also should not be placed in temperatures
less than 5°C (41° F) or greater that 35° C (95° F).
Service
1. Reading Instructions - This is probably one of the most important things to remember. All the safety and
operating instructions should be read before the appliance is installed and operated. The life span of your
purchase can depend on how well you take care of it.
2. Damage Requiring Service - The unit should be serviced by qualified
service personnel when:
(a) The A/C mains power cord or plug has been damaged
(b) Objects have fallen or liquid has been spilled into the unit
(c) The unit has been exposed to rain
(d) The unit does not appear to operate normally or exhibits a
marked change in performance
(e) The unit has been dropped, or the enclosure damaged
3. Servicing - The user should not attempt to service the unit beyond that described in the operating
instructions. All other servicing should be referred to qualified service personnel.
Clean the panel and controls with a soft cloth lightly moistened with mild detergent solution. Do not use any type
of abrasive pad, scouring powder or solvent such as alcohol or benzene.
6
