13
Pairing the Microphones
If the microphones experience signal loss or drop outs, the microphones should be resynced to the receiver .
In doing so, the receiver will automatically change the operational frequency of each mic .
Follow the steps below to resync the microphones with a new frequency channel:
1 . Power receiver on – Press power button once (1x)
2 . Once the KaraokeDual is powered on, press and hold the Power/Pair ID button until Microphone Status
LEDs are flashing .
3 . When the Mic Status LEDs are flashing, power on either microphone .
Note: The channel indicator lights on the receiver will then flash and the receiver will power off. This is normal.
4 . Power the receiver back on and check that one of Mic channel LEDs is solidly lit on the receiver; this
indicates the microphone was paired successfully .
5 . Repeat steps 2-4 for the second microphone .
Notes:
• When pairing, only one microphone can be paired at a time.
• The receiver WILL shut off when it pairs with a microphone, this is normal.
• The receiver will power off if the Power button is continued to be pressed down once the flashing LED has selected Mic.
These Will Flash
Hold 3 Sec.
Press Once
Press Once
Press Once
Check
