VocoPro DVG-777K III, Руководство пользователя

Страница: 16 / 28

16
Changing the Video Output Mode
The DVG-777K III has different video output channels: S-Video, Component, Etc. The DVG-777K III must be set
to the correct video output mode when using these output channels.
To select a video output modes:
1. If there is a disc in the DVG-777K III, make sure it is stopped
2. Press the SETUP button on the remote control
3. Scroll down to “video”.
4. Select the video mode that matches your connection.
NOTE: For component video connections: select INTERLACE-YUV if using an older TV with component jacks;
select P-SCAN YPBPR is using an HDTV.
Looping a Section of Disc using the A--B Button (CD, VCD, DVD, USB and SD only) Section of Disc using the A Section of Disc using the A
1. Press the A--B button on the remote control to set the starting point of the loop
2. Press the A--B button again to set the ending point of the loop and to begin the loop
3. Press the A--B button a third time to cancel the loop and resume normal playback
Setting the CUE MODE function
The CUE MODE will pause a disc at the two second mark. This is for use on CD+G karaoke discs with a song-
title screen at the beginning of each song as it allows you to display the song-title for the audience before playing
the song.
1. Press the CUE button on the remote control or front panel of the DVG-777K III to turn CUE on. A message
on the screen will indicate if CUE has been turned on or off. Each song will pause at the one second mark
3. Press PLAY to begin playing each song
NOTE: CUE MODE is not supported for DVD format
Using the Digital Equalizer (EQ)
The DVG-777K III has fi ve preset equalizer settings plus one user-programmable one.
1. Press the EQ button on the remote control to cycle through the settings: CLASSIC, ROCK, JAZZ, POP,
STANDARD
Using surround music effects
The DVG-777K III has fi ve surround music presets that can be used to enhance the music sound.
1. Press the MUSIC EFFECTS button to cycle through the surround music settings: Concert, Church, Passive,
Wide, & Live.
NOTE: These music effects do not effect microphone output.
Playing One Frame at a Time with the Step Function
The Step function allows you to view one frame at a time on DVDs and VCDs.
NOTE: The Step function does not work on CD+Gs
1. Press the STEP button to enter Step mode and pause the current frame
2. Press it again to jump to the next frame
3. Press PLAY to resume normal playback
General Operations