VocoPro DTX-5000G, Руководство пользователя

Страница: 15 / 24

10
ADVANCED OPERATION
#
b RESET
#
Using Digital Key Control
Use the Digital Key Controller to obtain the desired musical key (± 2.5 notes, 11-steps). The Digital Key
Controller LED indicators (± 5 and 0 indicators) display the selected pitch.
To step up, press the left button marked
“b” . To step down, press the right button marked “#” . To
revert back to the original key, press the RESET button.
Customizing Digital Echo settings
When using Digital Echo, you can customize the effect by adjusting the ECHO , REPEAT and DELAY
controls. REPEAT adjusts the interval repetition of the Echo effect. As more Repeat is applied, more
Echo intervals will be heard when using it and vice versa. DELAY adjusts length of each interval. As more
Delay is applied, there will be more “space” between the starting and ending point of each Echo.
Removing the Vocal Layer from a Multiplex Disc
When playing Multiplex software, you can use either the
CANCEL
or
PARTNER
feature to remove the vocal layer from playback. If you select
CANCEL
the vocal layer will be
removed. To have the vocal layer return to the mix, select
NORMAL
mode.If you select
PART-
NER
, the vocal layer will be removed only as long as you are singing into a Mic. When Mic activity
ceases, the vocal layer automatically returns. To have the original vocal layer return to the mix,
select
NORMAL
mode.
Removing the Vocal Layer from a Standard
(Non-Multiplexed) Disc
To remove the vocal layer from a standard disc, press the
DIGITAL VOCAL REDUCER
button on the remote control or set the
MPX SELECTOR
to
REDUCER
(orange LED). This feature is
designed to work with any non-multiplexed CD. Results may vary depending on how the disc was record-
ed originally. To bring vocals back to the mix, select the
NORMAL
button, or set the
MPX SELECTOR
to
NORMAL
(no LED).
Recording a Performance or Mix
To RECORD, connect a line-level patch cable from the AUDIO OUT 2 jack to a recording device.
b
RESET
Echo
Echo
Partner
Cancel
Normal
MPX Selector
Reducer
Normal
MPX Selector
• To do this from the front panel, use the MPX SELECTOR (see page 4 for MPX table.)
• To do this from the Remote Control, use the MULTIPLEX button set.