background image

4   \

Safety Instructions

1. Read Instructions - All the safety and operating 

instructions should be read before the appliance is 

operated.

2. Retain Instructions - The safety and operating 

instructions should be retained for future reference.

3. Heed Warnings - All warnings on the appliance and in 

the operating instructions should be adhered to.

4. Follow Instructions - All operating and use instructions 

should be followed. 

5. Attachments - Do not use attachments not 

recommended by the product manufacturer as they may 

cause hazards.

6. Water and Moisture - Do not use this unit near water. For 

example, near a bathtub or in a wet basement and the like.

7. Carts and Stands - The appliance should be used 

only with a cart or stand that is recommended by the 

manufacturer.

7 A. An appliance and cart combination      should be 

moved with care. Quick stops, excessive force, and uneven 

surfaces may cause an overturn.

8. Ventilation - The appliance should be 

situated so its location does not interfere 

with its proper ventilation. For example, the 

appliance should not be situated on a bed, 

sofa, rug, or similar surface that may block 

the ventilation slots.

9. Heat - The appliance should be situated away from heat 

sources such as radiators, heat registers, stoves, or other 

appliances (including amplifiers) that produce heat.

10. Power Sources - The appliance should be connected to 

a power supply only of the type described in the operating 

instructions or as marked on the appliance.

                                                                                          

11. Grounding or Polarization - Precautions should be 

taken so that the grounding or polarization means of an 

appliance is not defeated.

12. Power-Cord Protection - Power-supply cords should be 

routed so that they are not likely to be walked on or pinched 

by items placed upon or against them, paying particular 

attention to cords at plugs, convenience receptacles, and 

the point where they exit from the appliance.

13. Cleaning - Unplug this unit from the wall outlet before 

cleaning. Do not use liquid cleaners or aerosol cleaners. 

Use a damp cloth for cleaning.

14. Power lines - An outdoor antenna should be located 

away from power lines.

15. Non-use Periods - The power cord of the appliance 

should be unplugged from the outlet when left unused  for a 

long period of time.

16. Object and Liquid Entry - Care should be taken so 

that objects do not fall and liquids are not spilled into the 

enclosure through openings.

17. Damage Requiring Service - The appliance should be 

serviced by qualified service personnel when:

A.  The power supply cord or plug has been damaged; or 

B.  Objects have fallen into the appliance; or

C.  The appliance has been exposed to rain; or

D.  The appliance does not appear to operate normally or 

    exhibits a marked change in performance; or

E.  The appliance has been dropped, or the  

    enclosure damaged. 

18. Servicing - The user should not attempt to service 

the appliance beyond that described in the operating 

instructions. All other servicing should be referred to 

qualified service personnel.

The lightning flash & arrowhead symbol, 

within an equilateral triangle, is intended to 

alert you to the presence of danger.

The exclamation point within an 

equilateral triangle is intended to alert you 

to the presence of important operating and 

servicing instructions.

Explanation of Graphical Symbols

WARNING:

 

To reduce the risk of fire or electric shock,  

do not expose this unit to rain or moisture. 

CAUTION: To reduce the risk of electric shock, do 

not remove cover (or back). No user-serviceable 

parts inside. Only refer servicing to qualified 

service personnel.

CAUTION

RISK OF SHOCK

Note: To CATV system installer’s (U.S.A.): This reminder 

is provided to call the CATV system installer’s attention 

to Article 820-40 of the NEC that provides guidelines for 

proper grounding and, in particular, specifies that the 

cable ground shall be connected as close to the point of 

cable entry as practical.

Содержание DigiQuad-Conference V2

















Отзывы: