background image

1

Safety Instructions

CAUTION

RISK OF SHOCK

CAUTION: To reduce the risk of electric shock, 
do not remove cover (or back). No user-
serviceable parts inside. Only refer servicing to 
qualified service personnel.

WARNING

To reduce the risk of fire or electric shock, do 
not expose this unit to rain or moisture.  

Explanation of Graphical Symbols

The lightning flash & arrowhead 
symbol, within an equilateral triangle, 
is intended to alert you to the 
presence of danger.

The exclamation point within an 
equilateral triangle is intended to alert 
you to the presence of important 
operating and servicing instructions.   

1. Read Instructions

 - All the safety and operating 

instructions should be read before the appliance is 
operated.

2. Retain Instructions

 - The safety and operating 

instructions should be retained for future reference.

3. Heed Warnings

 - All warnings on the appliance and in 

the operating instructions should be adhered to.

4. Follow Instructions

 - All operating and use 

instructions should be followed. 

5. Attachments

 - Do not use attachments not 

recommended by the product manufacturer as they may 
cause hazards.

6. Water and Moisture

 - Do not use this unit near water. 

For example, near a bathtub or in a wet basement and 
the like.

7. Carts and Stands

 - The appliance should be used 

only  with a cart or stand that is recommended by the 
manufacturer.

7 A.

 An appliance and cart combination 

should be moved with care. Quick stops, 
excessive force, and uneven surfaces may 
cause an overturn.

8. Ventilation

 - The appliance should be situated so its 

 location does not interfere with its proper ventilation. For 
 example, the appliance should not be situated on a bed, 
 sofa, rug, or similar surface that may block the 
 ventilation slots.

9. Heat

 - The appliance should be situated away from

 heat sources such as radiators, heat registers, 
 stoves, or other appliances (including amplifiers) 
 that produce heat.

10. Power Sources

 - The appliance should be 

 connected to a power supply only of the type described 
 in the operating instructions or as marked on the 
 appliance.
                                                                                          

11. Grounding or Polarization

 – Precautions should be 

 taken so that the grounding or polarization means of 
 an appliance is not defeated.

12. Power-Cord Protection

 – Power-supply cords 

 should be routed so that they are not likely to be walked 
 on or pinched by items placed upon or against them, 
 paying particular attention to cords at plugs, 
 convenience receptacles, and the point where they exit 
 from the appliance.

13. Cleaning

 – Unplug this unit from the wall outlet 

 before cleaning. Do not use liquid cleaners or 
 aerosol cleaners. Use a damp cloth for cleaning.

14. Power lines

 – An outdoor antenna should be 

 located away from power lines.

15. Nonuse Periods

 – The power cord of the appliance 

 should be unplugged from the outlet when left unused 
 for a long period of time.

16. Object and Liquid Entry

 – Care should be taken so 

 that objects do not fall and liquids are not spilled into the 
 enclosure through openings.

17. Damage Requiring Service

 – The appliance should 

 be serviced by qualified service personnel when:

A.  The power supply cord or plug has been damaged; or 
B.  Objects have fallen into the appliance; or
C.  The appliance has been exposed to rain; or
D.  The appliance does not appear to operate normally 
      or exhibits a marked change in performance; or
E.  The appliance has been dropped, or the enclosure 
      damaged.

18. Servicing

 – The user should not attempt to service 

 the appliance beyond that described in the operating 
 instructions. All other servicing should be referred to 
 qualified service personnel.

Содержание DA-3600 PRO

























Отзывы: