VocoPro Commander CT, Руководство пользователя

Страница: 13 / 20

/ 13
(PR only) 1/4
"
jack connector- plug this
end into a high impedance mic input
connector (680 Ohm).
Transmitters:
Handheld, Condenser MIC, and Instruments
AF LED- this light shows when an audio input
signal is present.
(IT/GT3/GT9) 1/4" jack connector – plug this
end into an instrument with a 1/4
"
line level
output
Commander UR
(Wireless USB Receiver)
Blue LED- this signal LED confirms a solid
is connected to a computer source.
Green LED- these signal LEDs confirm
when radio frequency transmissions are
being received.
Line output- 3.5mm line output jack can be
used to monitor received wireless
audio transmission. (
On back of unit, not shown.)
Antenna- lifts up to enhance reception.