9
Operation
There is no manual syncing required; power on both transmitter and receiver modules to establish a connection. The
channel altered on the transmitter will automatically be communicated to the receiver(s).
INSTALLATION USE
TRANSMITTER
1 . Identify the appropriate bay on your compatible Vocopro unit.
2. Remove metal covering plate to access receptacle bay.
3. Locate and attach the internal white connector to the transmitter module.
4 . Select your signal strength output: Low, Medium, or High.
5 . Firmly insert module into position and secure with the included screws.
RECEIVER
1 . Identify the appropriate bay on your compatible Vocopro unit.
2. Remove metal covering plate to access receptacle bay.
3. Locate and attach the internal white connector to the receiver module.
4 . Select your signal strength output: Left-mono, Right-mono, or Stereo.
5 . Firmly insert module into position and secure with the included screws.
Note: Visit Vocopro.com for a complete list of compatible units.
Note: Illustration shown below is for clarity of installation only.
1
2
3
4
