Vocollect Talkman T5, Техническая документация, Страница: 23 / 144

The device is not designed to be repeatedly dropped. The
device has been tested to the following specifications:
Drop Tested
• 18 drops from 4 feet
5 to 95% non-condensing Humidity
IP54 Enclosure Rating
Loading an Operator's Templates onto a Device
You need a device with a charged battery, headset, and any other equipment (belt, bar code reader) you are
going to use. You must be within radio range. Make sure the device is on or sleeping. The LED indicator
should be either solid green or blinking green (A500, T5-series and T2-series) or solid green (T1).
1. Press the Operator button.
The device says "Current operator is operator name. Select menu item."
2. Press the + button or — button until the device says, "Change operator."
3. Press the Operator button.
4. The device says, "Please wait" and retrieves a list of operators and teams. Wait for the device to say,
"Select team".
• If the device says "Current operator is (operator name). Change operator", skip to step 8.
5. Press the + button or — button to scroll through the list of operator teams until you hear the name of a
team to which you belong.
6. Press the operator button.
The device says, "Please wait" and retrieves a list of all operators who belong to the team that was selected.
The device then says, "Current operator is (operator name). Select new operator."
7. Press the + button or — button to scroll through the list of available operator names until you hear your
name.
• If you do not hear your name, press the yellow play/pause button to cancel this operation and start
over from step 2.
• When selecting a team in step 5, choose the "All Operators" team.
• Consult with your supervisor if you are not listed in the "All Operators" team.
8. Press the operator button.
The device says, "Loading operator" and loads your templates. Once it has loaded your templates, the
device says, "Current operator is (your operator name). Good night." The device then goes to sleep. The
next time you turn the device on, it will be ready to use.
Charging an A500 or T5 Battery in a Device
1. Remove the wearable computer from the belt clip.
2. Disconnect any other peripherals.
3. Insert the wearable computer into an open slot on the charger, pressing down and then back until the
wearable computer clicks into place.
4. After the wearable computer has been placed into the charger, make sure that the LED indicator on the
wearable computer turns on and begins to blink green.
22 | OpenTopic | Talkman
®
Devices