PROGRAMMING THE DMI-64 MARK II
Parameter Information
00 Exit
- return to normal play mode, activate by pressing the Value Increment
button.
01 Basic Channel
- This is the only MIDI channel the instrument will respond to
in Omni Off mode. Changes to this parameter may change the preset you are
editing because you are editing the current preset selected for the basic chan-
nel.
* Value Range ( 01 - 16 ) Actual Value: ( 1 - 16 )
02 Omni Mode
- selects one of two MIDI modes OMNI ON (respond to all MIDI
channels) or OMNI OFF (respond only to basic channel or selected multitimbral
channels).
* Value Range ( 00 - 01 ) Actual Value: 00 = OMNI OFF, 01 = OMNI
ON
03 Waveform # (Zone 2)
- selects the waveform used by the digital voice os -
cillators.
Value Range ( 00 - 63 ) Actual Value: ( 0 - 63 )
04 Distortion
- activates analog distortion circuitry. This effect is global for the
entire audio output of the instrument; it is important to remember this when the
effect is used in multitimbral setups or split programs.
* Value Range ( 00 - 01 ) Actual Value: 00 = Overdrive Off, 01 = Over
-
drive On
05 Volume
- used to adjust volume of preset excluding percussion effect
volume. This is useful in balancing split programs or multitimbral setups.
Value Range ( 00 - 63 ) Actual Value: 00 = Softest, 63 = Loudest
06 Semitone Offset
- pitch offset for preset in semitones.
Value Range ( 00 - 64 ) Actual Value: 00 = -32 Semitones, 32 = 0 Semi
-
tones, 64 = +32 Semitones
07 Micro tonal Offset
- fractional pitch offset.
Value Range ( 00 - 64 ) Actual Value: 00 = -1 Semitone, 32 = 0 Semi-
tone, 64 = +1 Semitone
DMI-64 Mark II User's Manual
2-3
