S901 Quick User Guide Document: S901-3
----------------------------------------------------------------------------------------------------------------------------- ----------------
3
3. Front panel
OSD menu operation
➢
Activate OSD menu through MENU key
➢
Manipulate OSD function through INPUT keypads (same as input selection keys). The symbol are
under each input selection button.
Profile Save and Load (Custom setting Save and Recall)
➢
Press [Save] keypad, then select Profile Index # keypad (same as Input selection keys)
➢
Press [Recall] keypad, then select Profile Index # keypad (same as Input selection keys)
➢
The Index # is under each input selection key.
LED Indicator
➢
Input LED will turn to green when S901 has detected input signal.
➢
When user selects the input for display, LED will turn to orange.
➢
Output LED will turn to orange when S901 has detected display device in the output.
➢
Power LED:
➢
RED Power LED lighted: Power connected and has been turned off by remote controller. Need
to turn on by remote controller again.
➢
GREEN Power LED flashing at 1.0s interval: OSD lock through Lock through remote controller
85x command. Press 850 on remote controller number keys to unlock OSD.
➢
GREEN Power LED flashing at 0.5s interval: OSD Lock through press MENU for 5 seconds.
Hold Menu key for 5 seconds to unlock if the system.
Input LED
Three functions
1. Seamless input selection
2. OSD function key after
activate OSD
3. Index for Profile Save and
Load
Quad split view
ON/OFF hotkey
Activate OSD
MENU
Custom setting
Profile RECALL
Output
LED
IR Receiver
Custom setting
Profile SAVE