G901 User Guide Document: G901-2
----------------------------------------------------------------------------------------------------------------------------- ----------------
18
15.2.2 UHDWall Manager (UWM) PC Tool
✓
UWM is a PC tool executed through PC. User needs to download this tool from VNS
website. Once user connects G901 with PC through Ethernet or USB and open UWM, user
can access UWM and execute all operation similar to OSD menu through PC keyboard and
mouse. User can also backup system setting in PC and restore/copy to other units.
✓
UWM is for system setup and can’t read back the settings parameters from GeoBox.
✓
UWM PC tool is designed for G400/G900 series products.
✓
User can execute full operation functions and also update Firmware and MCU code through
UWM. User can control multiple units at the same time through change IP address.
(PS. UWM has not yet been modified for G901. Some functions are still pending)
15.3 System Standby and automatically turn off output signal
✓
[Options]
→
[Accessibility]
→
[Standby Time]
✓
If set [Standby Time] at 60, the system will get into Standby Mode after 60 seconds when no
input signal is detected. The output signals from G901 will also be terminated at the same
time. If G901 detects input signal again, it will automatically turn on the system again. During
Standby period, G901 will be still in ON status.
✓
If the monitor can automatically turn off/on function by detecting input signal, user can
control signal source to execute entire system on/off control.
