G-202 User Manual V 1.03 Document: G-202102
------------------------------------------------------------------------------------------------------------------------------------------------
7
is for the selection of output resolutions. User can select output resolution directly from shortcut keys on the
front panel or remote controller.
.
.
8. Passive 3D Display
8.1 System Configuration:
G-202 can decode 3D format from different 3D video sources, including Blue Ray DVD, STB, Media
player, Game and PC… 3D signal will be decoded by G-202 into signal for Right or Left eyes. One G-202
can only provide signal for one projector. RH/LH 3D signals need be displayed through two projectors.
Each projector will display signal only for one eye. User needs to set a polarized filter in front of the
projector and also wears polarized glasses. The glasses need to match the polarized filter in front of the
projectors so that the right eye can only see the scene for right eye and the left eye can only see the
scene for left eye. A 3D screen is also required to preserve the polarization of the image for 3D display. It
is possible to use optic spectrum method similar to Dolby 3D display using normal 2D screen.
8.2 GeoBox Setup for Stereoscopic 3D Display
8.2.1 GeoBox should not be installed at the side of the projector where the ventilation hot air comes out.
8.2.2 Two projectors can be installed at side by side or Top/Bottom position. Closer lens position will
reduce [4 Corner] adjustment range and reduce the loss of the image resolution and brightness.
8.2.3 Setup the polarized film and glasses so that RH/LH eye can only see the scene for one eye.
8.2.4
Use [4 Corner] or [Warp] adjustment Menu to align the images from two projectors completely
together. Place the polarized film in front of the projector before geometry adjustment.
Activate [Image Properties] Menu by Front
Panel keypad or Remote Controller.
5 items in the menu.
