Step1
Before starting, lay out all parts to your mount and match them to the
parts list provided. Verify that you have all your parts before attempting
to assemble the mount. Note: The LCD-CM2 and LCD-1C combo was
designed to mount two of the same TV or TVs of similar size and weight.
It is not designed to have two signifi cantly different TVs mounted. Also
note that LCD-1C part numbers have circles around their numbers and
LCD-CM2 has hexagons around their part numbers.
Step 2
For the follow steps it is assumed that you are assembling a new
LCD-1C and LCD-CM2. If you are retro fi tting a LCD-1C then pro-
ceed to step 8. Mark the ceiling or desired mounting surface in
preparation of installation of the ceiling plate LCD-1C. Pre-
drill if necessary and mount the ceiling plate LCD-1C to the
desired surface. Warning: Please verify that your mounting surface
will support the combined weight of your mount, mounting hard-
ware, and monitor. Also verify that the mounting surface is safe to
drill through. If in doubt, please contact a profession installer.
Step 3
Determine which VESA standard plate you will be using. If your TV
follows the VESA 75 standard then you should use the small mount-
ing plate LCD-1C / LCD-CM2. If your TV follows the VESA 100
standard then you should use the big mounting plate LCD-1C /
LCD-CM2. Once you determined the correct VESA plate attach
it to the pivot bracket LCD-1C / LCD-CM2 using the M6 screw
LCD-1C / LCD-CM2 and nylon nut LCD-1C / LCD-CM2.
Step 4
Attach the pivot brackets assemblies from step 3 to the support tube
LCD-CM2 using the 3/8” screw LCD-1C / LCD-CM2,
washers LCD-1C and LCD-CM2, and nylon nut LCD-1C /
LCD-CM2. Insert the adjusting screw LCD-1C / LCD-CM2
into the back of the pivot bracket LCD-1C / LCD-CM2.
Step 2: Mounting the ceiling plate
Step 3: Attaching the mount plate
to the pivot bracket
Step 4: Attaching the pivot
bracket to the support tube
VIDEO MOUNT PRODUCTS
6
Key:
LCD-1C
LCD-CM2
1
1
4
5
3
4
2
9
7
7
5
1
16
11
15
8
6
4
2
10
12
8