Step 1
Before starting, lay out all parts to your mount and match them to
the parts list provided. Verify that you have all your parts before
attempting to assemble the mount.
Note: It is highly recommended that the installation of this mount
be done by a professional.
Step 2
Assemble the stand bars creating two wells as show in the im-
age to the left using the short screws , lock washers and
nuts .
Step 3
Attach the support tube in the center of the middle stand bars
using the long screw , lock washers and nuts .
Step 4
Locate the holes which are lower on the support tube . Select
two arms and place them so the arms are connecting to
the stand bars that are 90 degrees rotated from the lower set of
holes in the support tube . Use the short screws , lock washer
and nut to attach the arms to the stand bar . Line up
the holes on the arms with the lower set of holes in the support
tube and use the long screw , lock washer and nut
to connect them together.
Step 2: Assembling the sled
Step 3: Attaching the
support tube
Step 4: Attaching the arms
to the lower arms in the
support tube
4
2
7
5
5
6
1
1
6
3
2
1
2
3
6
7
1
3
5
4
2
5
6