5
DOC8003, Rev. B
March, 2003
Elite
Installation Manual
1.0
General Installation and Operation Warnings
1. Read and understand the operating and manual override instructions prior to use of the Elite lift.
2. Read and understand all safety precautions prior to installing or operating the Elite lift.
3. Discontinue use of the lift if it appears to be functioning abnormally and contact VMI technical
support immediately for assistance.
4. Fully engage the vehicle parking brake prior to installing or operating the Elite lift.
5. Vehicle door, tailgate or hatch must be positively secured in the open position before the Elite lift is
operated.
6.
NEVER
use the Elite lift to load human beings, or objects other than powerchairs or scooters into
the vehicle.
7. Operators and bystanders must keep clear of all moving parts during the entire operating cycle of
the Elite lift. Keep hands and clothing away from all moving parts during operation of the lift.
8. Keep the operating instructions and manual override wrench accessible and in the vehicle with the
lift.
9. When installing the Elite Lift, check for any obstructions such as the fuel tank, fuel lines, electrical
circuitry, or exhaust components prior to drilling holes in the vehicle or routing the electrical
connections.
10. The Elite lift must be installed and serviced by an authorized VMI dealer.
11. Disconnect the negative terminal of the vehicle’s battery before beginning the installation.
12. Ensure that the Elite will clear the rear bumper, hatch and interior vehicle surfaces prior to installing
the lift.
13. Replace any missing or worn decals.
2.0
Principle of Operation
The Elite lift is powered by two 12 volt, DC electrical motors wired to the electrical system of the vehicle.
The UP and DOWN functions operate when one of the motors turns a drive screw which propels the
platform along a steel track. At the end of travel, a magnetic limit switch activates a second motor which
raises and lowers the platform assembly to the ground. The lift is activated via a switch unit at the end
of an electrical cord, or via remote control and will complete a half cycle by depressing and holding the
appropriate switch.
WARNING!
READ MANUAL BEFORE INSTALLING THE LIFT.
FAILURE TO DO SO MAY RESULT IN SERIOUS
BODILY INJURY AND/OR PROPERTY DAMAGE.
!
!
