R25 Performance User Manual
15
ASSEMBLY
Step 1
Remove the e-scooter from the packaging and check
whether all parts of the scope of delivery (page 4) are
included. Now place the e-scooter on the ground in
front of you, press the folding lever (9) down and pull
the handlebar (7) up until it engages.
Step 2
Now close the safety lock (8) to secure the handle-
bar (7). Now fold the two handles upwards until they
engage.
Step 3
It is now important that you fix the loose components
with the supplied tool kit. Make sure that the compo-
nents are mounted flush with the rubber handles so
that the two snap locks (6) for folding the handles are
not blocked.
Step 4
Now open the quick release fastener (5), extend the
handlebar (7) to the desired height and then close the
quick release fastener (5) again.
Folding
To fold the e-scooter, open the quick release fastener
(5) again and push the handlebars down as far as they
will go. Now pull the two snap locks (6) and fold the
handles down. Now release the safety lock (8). Pull the
folding lever (9) and now carefully fold down the hand-
lebar (7) until the folding lever (9) engages by itself.
