Vmarker IR-pen Touch, Руководство пользователя

Страница: 3 / 10

E
N
1 General
This manual is still a work in progress, it will be regularly updated. You can e-mail any
suggestions to further improve this manual to: ludwig@vmarker.org.
2 Setup
The Vmarker IR-pen Touch requires 2 AA batteries. The battery-holder is very tight to
prevent loosing the batteries.
Before placing batteries or before removing them, please switch off the IR-pen.
2.1 How to place the batteries
When placing batteries in your Vmarker IR-pen Touch, you best put the negative (-)
terminal of the battery in the holder first and then tilt the battery into his place.
Shift the first battery to the spring-contact to place the second battery. Again by placing
the negative (–) terminal first and then tilt the second battery in to his place.
2.2 How to remove the batteries
To remove the batteries you reverse the order, you first remove the battery on the positive
(+) terminal by tilting it. Then the remaining battery also by tilting the positive (+) terminal
out of the holder.
ATTENTION: Don't forget to switch off the IR-pen before placing of removing
batteries.
Vmarker IR-sensor USB 1