VMAC
– Vehicle Mounted Air Compressors
Toll Free:
1-888-241-2289
Fax: 1-250-740-3201
50
3) Check the gasket-sealing surface on the front of the tank for
contamination, old gasket material, or damage (Figure 37).
Check the filter to ensure that the threaded nipple did not
unscrew with the filter. If it is in the filter, remove it
carefully to avoid thread damage, coat the threads that go
into Separator Tank Base with a small amount of blue
Loctite and install it into the Tank Base (Figure 37).
Figure 37 - Compressor oil filter
4) Apply a thin coating of compressor oil to the filter-sealing gasket and
fill the filter with VMAC compressor oil.
5) Spin the filter clockwise onto the threaded nipple until the gasket
contacts the sealing surface on the tank, then tighten the filter an
additional 3/4 to 1 turn to seat the sealing gasket.
Содержание RAPTAIR-G30
