Vmac A700184 Скачать руководство пользователя страница 3

VMAC 

– 

Vehicle Mounted Air Compressors

 

Toll Free:

 

1-800-738-8622 Local: 1-250-740-3200 

Fax: 1-250-740-3201 

 

8. 

Attach the extended interface cables to the Output and Ground terminals using the 
unit’s set screws. The RED wire (Pin C on connector) goes to the Output, and 
GREEN wire (Pin B on connector) goes to the Ground. Use Loctite 425 and fasten 
firmly, but do not over-tighten set screws. 

 

9. 

Test the power converter as described below before connecting the interface cable 
to its mating connector on the Predatair. 

 

Testing the Power Converter with the Predatair 

 
1.  Verify power converter wiring. 

 

2.  Re-attach battery/power source and verify voltage polarity on the interface cable 

connector with a multi-meter. RED/Pin C (+) to GREEN/Pin B (-) should be nominal 
12V. 
 

3.  Connect the interface cable connector to its mating connecting on the Predatair. 

 

4.  The Predatair display screen will power on and perform SYSTEM CHECK followed 

by SYSTEM READY. The warning light on the display box should not be illuminated. 

 

Note: 

Perform pre-operation checklist tasks. See Predatair Installation 

Manual for details on installation requirements, hydraulic system 

requirements, and pre-operation checklist tasks.

 

 

5.  Enable PTO/hydraulic system. When temperatures are below -15°C, circulate the 

hydraulic fluid to warm it before activating the PREDATAIR.  
 

6.  Press the ON button. The Ready light should be illuminated. The warning light on 

the display box should not be illuminated. 
 

7.  Operate the system with an air tool for at least ½ hour. Ensure the Predatair fan 

powers on during the test. 

 

Note: 

The fan powers on when compressor temperature rises above 88°C. It 

also powers on if hydraulic and compressor temperatures are both above 

66°C and 77°C, respectively.

 

 
8.  For the duration of the test, the Predatair should remain powered and the display 

box screen show text. (i.e. Predatair should not turn off by itself, nor should the 
display box screen go blank when the fan starts/turns-on.) 

 
9. 

Press OFF on the Predatair’s display box. 

 
Review the Predatair Owners Manual before using the Predatair. 
 

Отзывы: