VMAC - Vehicle Mounted Air Compressors
VMAC Technical Support: 888-241-2289
VMAC Knowledge Base: kb.vmacair.com
12
Installation
☐
Ensure the system is cool, and the ignition key switch is in the “OFF” position.
☐
Disconnect the negative battery cable.
☐
Disconnect the spark plug wire (Figure 2).
Figure 2 — Spark plug wire
Apply Loctite 242 (blue) to all fasteners (except nylon lock nuts)
unless otherwise stated.
Figure 3 — Remove ball valve
(Shroud removed for clarity)
☐
Remove the ball valve and NPT adaptor from the WHASP Tank (Figure 3).
