Vlinx Vlinx VESR321, Руководство пользователя

Страница: 15 / 43

Setup and Connections
www.bb-elec.com
www.bb-europe.com
11
3. Configure your serial server as required.
Note: For more information on configuration options refer to Section 4: Description of Serial
Server Properties.
Configuring the VESR321 Family Serial Server via the Serial Port (Console Mode)
Your serial server can be configured via the serial port using Vlinx Manager. To use this feature
the serial server's serial port must be connected to the serial port of a PC (using a null modem
cable).
Figure 12. Console Mode Setup
To configure the serial server it must be put into Console Mode, using the Mode switch.
To enter Console Mode, press and hold the Mode switch for between two and ten seconds. The
LED indicators respond as follows:
1. The Ready LED blinks while the button is being pressed.
2. The serial server is in Console Mode when the Ready LED is Off.
To configure the serial server, open the Vlinx Manager software and set up the serial server's
parameters as required.
Note: For more information on configuration options refer to Section 4: Description of Serial
Server Properties.
To exit Console Mode , press and hold the Reset switch for two seconds, or turn off the power
from the VESR321, wait a few seconds, and turn the power on again.
Saving your configuration will also take you out of Console Mode.
The LEDs go back to their normal states when the device resumes normal operation.
VESR321 Family Serial Servers Operational Connections
VESR321 Serial Servers can operate in Direct IP, Virtual COM Port and Paired Modes.