ASSEMBLY OF THE VENTILATION SYSTEM
READ THESE OPERATING INSTRUCTIONS BEFORE INSTALLING THE
DEVICE ATTENTION!
THE VENTILATION PIPE OF THE INSTALLED VENTILATION SYSTEM MUST NOT BE CLOSED
BY CURTAINS, CURTAINS, ETC. BEING BLOCKED AS THIS IS THE AIR CIRCULATION
AFFECTED.
1. Prepare core holes in the outer wall.
Prepare one or two core holes in the outer wall, depending on the con fi guration of the ventilation system. For e ffi cient ventilation,
it is recommended that the ventilation systems be installed as far from each other as possible. It is advisable to make preparations
for laying the power cable and other cables in the wall when drilling the core holes. The size of the core hole and the minimum
distance to the surface, e.g. to the wall, ceiling or window, as well as the minimum distance between the ventilation systems is
shown below.
min 500 mm
Ø 180 mm
min 500 mm
min 1 m
min 1 m
2. Prepare the ventilation pipes of the required length.
Measure the wall thickness B.
The required length of the ventilation pipe is L = B + A.
A means the protruding part on the outer wall that is required to
mount the outer grille or the outer hood.
Distance A is specified in the assembly instructions for the
ventilation hood.
Cut the ventilation pipe to length L.
B.
L.
A.
www.vlano.de
9
min
500
mm
min
1
m
