Vlano 100 AV, Руководство по эксплуатации, Страница: 5 / 16

DE
ASSEMBLY
The fan is for ceiling or wall mounting and ventilation through a ventilation shaft or a ventilation pipe
with a corresponding diameter designed, Fig.1
Assembly order:
Step 1 - turn off the power supply and prepare the room for the fan assembly, Fig. 2-3; Step 2 - remove
the front grilles from the fan, Fig. 4;
Step 3 - the Attachment points mark for the fan, drill and the fan attach , Fig. 5-7; Step 4 - the fan to the
power grid connect, if necessary, set the follow-up time and the humidity setpoint, if necessary, Fig. 8-14;
Step 5 - put the front grille back on the case, Fig. 15; Step 6 - Apply
power to the fan, Fig. 16.
DESCRIPTION OF TERMINALS ON THE CIRCUIT DIAGRAMS
L - phase (only for mains 220-240 V)
N - 0 (only for mains 220-240 V)
LT (ST) - control line of the timer; S -
external off / on switch.
ELECTRONIC CONTROL LOGIC
The fan with the time switch T - the fan starts after actuating the external switch, e.g. light switch. The signal
from the switch applies the control voltage to the input terminal LT (ST). After disconnecting the control
voltage, the fan continues to operate for the set time, from 2 to 30 minutes.
5