11
A7: Humidity
A8: Temperature
Part B:
B1: “
℃
/
℉
” button
B2: “
▲
” button
B3: “12/24” button
B4: “MODE/SET” button
B5: “RESET” button
B6:
“
▼
/
” button
B7:
“
” alarm on/off button
Part C:
C1: Wall Mount Hole
C2: Stand
C3: Battery Compartment
3
. Getting Started:
3.1 Main Unit:
⚫
Slide open battery compartment cover [C3]
⚫
Insert 4 x AA size batteries observing polarity
[“+” and“ –“ marks]
.
⚫
Replace battery compartment cover [C3]
4. Time and Alarm Setting
4.1 Radio Controlled Clock:
⚫
After powering on, the clock automatically starts to scan the DCF time signal. Radio Control
Icon“
” flashes on the LCD.
flashes,
Indicating now is receiving
DCF signal
turns on,
Indicating signal received
successfully
disappear,
Indicating signal reception
failed
⚫
The clock automatically scans the time signal at 3.00 a.m. every day to maintain accurate timing.
If reception fail, sc
anning stops (“
” on LCD disappear)
⚫
The clock can be set to scan the time signal manually by holding “
”
button for 3 seconds.
Each reception takes about few minutes.
⚫
Stop scanning by holding
“
” button
for 3 seconds.
⚫
“
” shown on the LCD if i
t is in Daylight Saving Time Mode
4.2 Manual Time Setting:
⚫
In time display mode, press and
hold “M
ODE
” button for 3 seconds to enter Clock/Calendar
setting Mode.
⚫
Press “
▲
”or “
▼
”button to adjust the setting and press “M
ODE
” button to confirm each setting.
By keeping the
“
▲
”or “
▼
”but
ton pressed, could speed up the setting.
