TRudder pedals. Installation and setup manual
6
The back leg is attached to the case by two screws. Three adjustment holes make
possible to set the angle between the case and the leg thus providing pedal setup
for pilot foot size. The screw, drived into the fourth hole, is using as an axis. Before
the leg is fixed in a chosen position you can rotate it around this screw.
4.2. Choose an appropriate adjustment hole and insert the screw with washers into
it (fig. 2.6).
2.6.
4.3. Engage shaped nuts on the screws from the outer side of the case(fig. 2.7)
2.7.
4.4. Insert engaged shaped nuts into internal housing of the leg (fig. 2.8).
2.8.
Fig. 2.6.
adjustment
holes
axis
hole
Fig. 2.7.
