Status of indicator
Meaning
Continuously in bright status
charging/finding
Red led off
Power off or charged full
5. Device
5.1 Open the USB rubber plug by hand and insert a 4G sim card as shown in
the picture with the chip facing down.
5.2
Install the SIM card correctly
that to active device)
Open the cover by screwdriver, Insert a nano SIM card support LTE/ GSM/GPRS
network into the slot and make sure the chip side is down.
After pressing the SOS key for three seconds, the device can be started.
(when the green light and blue light are both flashing , you can do setting by step as below:)
Set admin number,by sending a SMS command to the SIM card inside device.
For example: admin86186******** (+86186********should be your phone number)
In 10 or 40 seconds, the unit will begin to work and acquire the GSM signals as well as the
GPS signals. The indicator will keep flashing every 3 seconds when the unit has received the
signals.
If the device is still not work on platform, pls check query parameters sms
“
param1
”
to
conform IP address .
5.3 Battery and charger
Charge the battery for 8-12 hours on the first time. Please use the charger
and battery that are configured by the manufacturer. The standard
configuration battery is a lithium battery.
Warning :
a: The battery of this product is a lithium battery that contains harmful
chemical components and may explode. Please do not force it, puncture it and
put it into fire.
