3
Assembly Instructions
Remove all packing from the unit.
Peel off all protective plastic covering from metal
Wash all removable parts in warm, soapy water and dry them thoroughly.
Installation
Your
Vizu Mega Fries Topper
unit can be set up to work either to the left or right hand side
of your fryer(s).
1.
Check both heat switch and light switch are in the OFF position.
2.
Firstly position the Mega Fries Topper unit in the desired position and lock both front
castors in position. Connect this to the power supply.
3.
In order to be able to load the Mega Fries Topper unit with fries the side glass needs
to be on the opposite side of the machine to the fryer(s). If the glass needs to be
moved this is possible by unscrewing the grub screws and sliding the glass out, to
re-fit simply slide back in and tighten screws.
Operating Instructions
1.
Use the switch with the red LED to start heating of the under pan element and rear
pair of heat lamps.
2.
Use the switch with the green LED to light front row heat lamps.
3.
Allow 20 minutes to reach operating temperature.
4.
When fries are cooked lift out of oil and allow to drain.
5.
When draining is complete move basket across to Mega Fries Topper serving area
and tip contents carefully into tray.
6.
Take the salt shaker from its holder and add salt as desired.
7.
Now using the fry scoop slide a bag/box over the bottom and scoop chips.
8.
The bags full of fries can now be placed in the bagging rack prior to sale.
Note:
It is important that fries are held for no longer than
10 minutes
. After this time the
quality of the fries will deteriorate.
