VIZRT Viz SDI IO, Руководство пользователя

Страница: 19 / 22

Viz SDI I/O Module Operating Instructions
`19
2.3.3
DASHBOARD TOOLS
A
UDIO
(H
EADPHONES
)
You can connect a headset to the (green) audio output jack on the rear of Viz SDI IO’s motherboard.
FIGURE 24
Controls for Headphone audio are found in the lower-left corner of the dashboard at
the bottom of the screen (Figure 24).
1. The audio source supplied to the
Headphone
jack can be selected using the menu
next to the
headphone icon
(Figure 25).
2. The
Volume
for the selected source can be adjusted moving the slider provided at
right (double-click this control to reset it to the default 0dB value).
R
ECORD
The
Record
button is also located in the lower-right corner of the dashboard (Figure 26). Click it to open a
widget allowing you to begin or stop recording of individual channels (or start/stop all recordings.)
Notes: The destinations for recorded clips, their base file names and other settings are controlled in the
Configuration panel (see Figure 2-8). Recording NDI sources is not supported. The Share Local Recorder Folders
can be used to expose local folders assigned to capture duties on your network, making it easy to access
captured files externally.
1
2
FIGURE 26
FIGURE 25