Drive in gags , supplied with the
doorstation) to cover screw heads.
(х2
Fasten the doorstation BVD
3
to the skew base as described
in its operating instruction.
-40 х
Drive in nail screws
to securely
fix BVD-403x to the sun/rain shield.
(х2)
Attach assembled BVD-403x to
the sun/rain shield. Make sure
that their holes match.
1
3
4
Doorstation BVD
3
fixing to the sun/rain shield
-40 х
Figure 2
Doorstation BVD
fixing to the sun/rain shield
-405х
1
3
4
Drill a hole 4.5 mm over a special
mark in the sun/rain shield.
6
Sun/rain shield mounting
on a wall
4
7
5
6
1
23
33
90
INSTALLATION WITH BVD-405x
Put marks for holes on a wall.
Use measurements given on Fig.3,
or attach the sun/rain shield to the
wall and use its holes as a pattern
(and make sure that use the newly
drilled hole ).
Drill holes
4
diameter
and
mm deep.
(х )
60
6 mm in
Hammer in anchors
4 .
6х60 (х )
Stick self-adhesive rubber seal
strip to the back of the sun/rain
shield.
Attach the sun/rain shield to the wall.
Make sure that its holes match the
anchors in the wall.
Drive in nail screws
to securely
fix the sun/rain shield to the wall.
(х2)
Fasten the doorstation BVD
5
to the skew base as described
in its operating instruction.
-40 х
Attach assembled BVD-405x to
the sun/rain shield. Make sure
that their holes match.
Drive in nail screws
to securely
fix BVD-405x to the sun/rain shield.
(х2)
Drive in gags , supplied with the
doorstation) to cover screw heads.
(х2
7
1
Figure 3
Figure 4
www.vizit.eu
MK-405
2/2
OPERATING INSTRUCTION
