VIZIO VP422 HDTV10A User Manual
Version 5/29/2008
12
www.VIZIO.com
1.5
1.5
1.5
1.5
VIZIO Re
VIZIO Re
VIZIO Re
VIZIO Remote Control
mote Control
mote Control
mote Control
GUIDE
– This button displays program information. Press this button once and the information of the
program being viewed is shown. Press it a second time and the Electronic Programming Guide will
appear in the screen.
POWER
– Press this button to turn the TV on from the Standby mode. Press it again to return to the
Standby mode.
TV
– Press this button to select TV.
AV
– Press this button to select the Audio Video input. Pressing this button
repeatedly will get you to the AV input. Keep in mind that if S-Video cable is
being used, then AV will show the signal going through this input as the S-
video takes priority.
COMP
– Press this button to select the Component (YPbPr) input. Pressing
this button repeatedly will take you through the Component input.
HDMI
– Press this button to select the HDMI input. Pressing this button
repeatedly will get you through the HDMI (HDMI1, HDMI2 and HDMI3)
different inputs.
MENU
– Use this button for the On-Screen Display (OSD) menus. When use
within the OSD menus, pressing this key will make the selection of an option.
- These buttons navigate the On-Screen Display (OSD).
MUTE
– This button turns the sound on and off.
LAST
– This button recalls the previously viewed channel when it is used in
TV mode; meaning that the TV unit has control over the signal or program
being watched. This button also has different functions when being used in
conjunction with the On-Screen Display (OSD) menu.
VOL (+ or -)
– These buttons turn the volume up or down.
CH (+ or -)
– These buttons change the channels up or down.
NUMBER BUTTON PAD
– Use these
buttons to select a channel or enter a
password.
INPUT
– This button allows the user to cycle
through the inputs. Repeatedly pressing of
this button will step you through the input
sources in the following sequence: TV, AV
(S-Video),
Component,
RGB,
HDMI1,
HDMI2 and HDMI3. Once you have stepped
through the entire sequence, you will return
to the beginning.
- (DASH)
– When selecting a digital channel
directly, use this button for the separation of
main and sub-channels. For example,
channel 28-2 would be selected by the button sequence 2 8 – 2.
