background image

VINC. 

                                                                     

Service Manual

 

VIZIO VF550XVT1A 

 

 

VIZIO VF550XVT1A Service Manual 

COPYRIGHT © 2000 

V, INC. 

ALL RIGHTS RESERVED.

 

 
IBM and IBM products are registered trademarks of International Business Machines Corporation. 
 
Macintosh and Power Macintosh are registered trademarks of Apple Computer, Inc. 
 
VINC and VINC products are registered trademarks of V, Inc. 
 
VESA, EDID, DPMS and DDC are registered trademarks of Video Electronics Standards 
Association (VESA). 
 
Energy Star is a registered trademark of the US Environmental Protection Agency (EPA). 
 
No part of this document may be copied, reproduced or transmitted by any means for any purpose 
without prior written permission from VINC. 
 
 
FCC INFORMATION 
This equipment has been tested and found to comply with the limits of a Class B digital device, 
pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection 
against harmful interference in a residential installation. This equipment generates, uses and can 
radiate radio frequency energy, and if not installed and used in accordance with the instructions, 
may cause harmful interference to radio communications. However, there is no guarantee that the 
interference will not occur in a particular installation. If this equipment does cause unacceptable 
interference to radio or television reception, which can be determined by turning the equipment off 
and on, the user is encouraged to try to correct the interference by one or more of the following 
measures -- reorient or relocate the receiving antenna; increase the separation between 
equipment and receiver; or connect the into an outlet on a circuit different from that to which the 
receiver is connected. 
 
FCC WARNING 
To assure continued FCC compliance, the user must use a grounded power supply cord and the 
provided shielded video interface cable with bonded ferrite cores. Also, any unauthorized changes 
or modifications to Amtrak products will void the user’s authority to operate this device. Thus VINC 
Will not be held responsible for the product and its safety. 
 
CE CERTIFICATION 
This device complies with the requirements of the EEC directive 89/336/EEC with regard to 
“Electromagnetic compatibility.”  
 
SAFETY CAUTION 
Use a power cable that is properly grounded. Always use the AC cords as follows – USA (UL); 
Canada (CSA); Germany (VDE); Switzerland (SEV); Britain (BASEC/BS); Japan (Electric 
Appliance Control Act); or an AC cord that meets the local safety standards. 
 

 

 

Содержание VF550XVT1A - 55" LCD TV
























Отзывы: