Transmit Power
802.11b: 17dBm
802.11g: 54 Mbps – 13dBm
802.11a: 54 Mbps – 13dBm
802.11gn HT20: MCS15/7– 11dBm
802.11gn HT40: MCS15/7– 8.5dBm
802.11an HT20: MCS15/7 – 11dBm
802.11an HT40: MCS15/7 – 11dBm
Receive Sensitivity
802.11b: 11Mbps
:
- 86dBm
802.11g: 54 Mbps
:
- 75dBm
802.11a: 54 Mbps
:
- 74dBm
Modulation Type
802.11b: CCK,DQPSK,DBPSK
802.11g: 64 QAM, 16 QAM,QPSK, BPSK
802.11a: 64 QAM, 16 QAM,QPSK, BPSK
HT20,HT40: 64 QAM, 16 QAM,QPSK, BPSK
Antenna
4 internal antenna
Operating Channels
2.4GHz: 11b/g/n for North America
5GHZ: 11a/n for North America
Standard
IEEE 802.11 a/b/g/n, 802.3u, USB
Power
Voltage Range
110~240Vac at 50/60 Hz
Power
12 Vdc 1.5 A
Environmental Conditions
Operating
Temperature: 41°F ~ 105.8°F (0°C~40°C)
Relative Humidity: 10~80% noncondensing
Dimensions
7.98 × 5.87 × 1.3 inches (202.79 × 149 × 32.97 mm)
Net Weight
.66 lbs. (0.3 kg)
Gross Weight
1.1 lbs. (0.5 kg)
Certifications
FCC, CE, UL (Power Adapter)
*Product specifications may change without notice or obligation.
Legal notices
FCC Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
This product has been tested and complies with the specifications for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can
radiate radio frequency energy and, if not installed and used according to the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause
harmful interference to radio or television reception, which is found by turning the equipment off and on, the user is encouraged to try to
correct the interference by one or more of the following measures:
Reorient or relocate the receiving antenna
Increase the separation between the equipment or devices
Connect the equipment to an outlet other than the receiver’s
Consult a dealer or an experienced radio/TV technician for assistance
FCC Caution: Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to
operate this equipment.
FCC Radiation Exposure Statement
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and
operated with minimum distance 20 cm between the radiator and your body. To maintain compliance with FCC RF exposure compliance
requirements, please avoid direct contact to the transmitting antenna during transmitting. This transmitter must not be co-located or operating
in conjunction with any other antenna or transmitter, except the built-in collocated transmitters. The availability of some specific channels
