background image

CONFIDENTIAL – DO NOT COPY

 

Page 2-3

 

File No. SG-0298

 

 

(3) Please attach the surface transparent protective plate to the surface in 

order to protect the polarizer. Transparent protective plate should have 
sufficient strength in order to the resist external force. 

(4) You should adopt radiation structure to satisfy the temperature 

specification. 

(5) Acetic acid type and chlorine type materials for the cover case are not 

desirable because the former generates corrosive gas of attacking the 
polarizer at high temperature and the latter causes circuit break by 
electro-chemical reaction. 

(6) Do not touch, push or rub the exposed polarizers with glass, tweezers or 

anything harder than HB pencil lead. And please do not rub with dust 
clothes with chemical treatment. Do not touch the surface of polarizer for 
bare hand or greasy cloth.(Some cosmetics are detrimental to the 
polarizer.) 

(7) When the surface becomes dusty, please wipe gently with absorbent 

cotton or other soft materials like chamois soaks with petroleum benzine. 
Normal-hexane is recommended for cleaning the adhesives used to attach 
front / rear polarizers. Do not use acetone, toluene and alcohol because 
they cause chemical damage to the polarizer. 

(8) Wipe off saliva or water drops as soon as possible. Their long time contact 

with polarizer causes deformations and color fading. 

(9) Do not open the case because inside circuits do not have sufficient 

strength. 

 

9-2. Operating Precautions 

(1) The spike noise causes the mis-operation of circuits. It should be lower 

than following voltage: 
V=±200mV(Over and under shoot voltage) 

(2) Response time depends on the temperature.(In lower temperature, it 

becomes longer.) 

(3) Brightness depends on the temperature. (In lower temperature, it becomes 

lower.) And in lower temperature, response time(required time that 
brightness is stable after turned on) becomes longer. 

(4) Be careful for condensation at sudden temperature change. Condensation 

makes damage to polarizer or electrical contacted parts. And after fading 
condensation, smearor spot will occur. 

Содержание SV420M - 42" LCD TV






























Отзывы: