13
Turn your TV on, the Sound Stand will
automatically turn on and begin searching for an
active input.
The LED indicators on the front of the Sound Stand
will begin cycling in pairs through inputs until an
audio source is detected.*
You can press the
Input
button to switch between
audio sources. For example, if you connected your
TV to Input 1, set the Sound Stand to Input 1.
Hardware setup is complete.
Power
Input
7
*
$XWR GHWHFW IXQFWLRQ RQO\ RFFXUV RQFH ZKHQ 6RXQG 6WDQG LV ȴUVW SRZHUHG RQ 7R HQDEOH WKLV
feature again, you must do a Factory Reset or
Press and hold
the
INPUT
button on the remote
control for 5 seconds to enable the auto input detect function.
Tip:
Pressing the INPUT button will
stop the auto detect function.
