Vizio SB4451-C0, Быстрый старт

Страница: 18 / 54

English - 18
8
Remove the battery cover by gently
sliding it away from the remote.
9
Insert the included batteries and gently
slide the battery cover back into place.
10
Turn your TV on, the sound bar will automatically turn on and
begin searching for an active input.*
The LED indicators on the front of the sound bar will begin cycling
in pairs through inputs until an audio source is detected.**
You can press the
INPUT button to switch between audio
sources. For example, if you connected your TV to AUX 1, set the
sound bar to AUX 1.
Input Power
Top Top
Tip: Pressing the INPUT button will stop
the auto detect function.
*Occurs only during first-time set up.
**Auto detect function only occurs once when the sound bar is first powered on. To enable this feature again, you must
do a Factory Reset (see the Using Button Combinations section for more information) or press and hold the INPUT
button for 3 seconds.
When needed, VIZIO recommends
replacing the batteries that came
with this remote with two, new
Duracell ‘AAA’ alkaline batteries.