English - 27
Function
LED Behavior
Description
TV Remote
Press the
Next/Previous button to enable/disable VIZIO TV Remotes. When enabled
(On), you can use a VIZIO TV remote control to turn on the sound bar (using the TV
Volume Up button) and control volume.
Program Remote
−−
Press the
Next/Previous and Play buttons to toggle and select and program your
TV remote to control the
Volume Down, Volume Up, and Mute functions on your
sound bar. See the
Program Remote section for more information.
Eco Power On/Off
Press the
Next/Previous button to enable/disable Eco Power Mode. When enabled
(On), the sound bar will go into standby after a period of inactivity. The sound bar
will automatically turn off when no audio signal is detected. Off disables this feature.
Note: If you would like to cast content without the need to manually turn on the
sound bar, set this function to OFF.
Speaker Test
—
Press the
Play/Pause button to activate the speaker test function. A voice will begin
calling out each speaker beginning with
left front. (Left Front, Center, Right Front,
and subwoofer-white noise) If any of these are missing, check the connection and
run the speaker test function again.
Link
Press the
Next/Previous and Play buttons to select and confirm enabling or
disabling Link Mode on your sound bar. Link Mode allows the VIZIO SmartCast App
to reconnect the sound bar to Wi-Fi or paired bluetooth devices in the event of a lost
connection or if a new device is being paired.
Reset
−−
Press the
Next/Previous and Play buttons to select and reset your remote and
sound bar to the factory default settings. All paired Bluetooth devices will be un-
paired. All programmed IR remotes will also be removed. See the
Reset to Factory
Default Settings section for more information.
When a Dolby
Digital or DTS signal
is detected.
Dolby Digital and DTS are only available on either the
Coaxial In, HDMI IN or
Digital Optical Audio In inputs. When a Dolby Digital or DTS signal is detected, the
Dolby Digital (White) / DTS (Blue) indicator LED will light up for 5 seconds before
fading away.
When the soundbar
successfully
connects to Wi-Fi.
When Wi-Fi is succesfully set up via the VIZIO SmartCast app, the blue indicator LED
will light up to confirm a successful connection.
Prg Remote
EcoPwr
VZtv Rmt On
TV Remote On
TV Remote Off
Eco Power On
Eco Power Off
Dolby Digital and DTS
Indicator LED
Wi-Fi Indicator LED
Spkr Test
Reset No
Link On
Single light with sound
upon confirmation
