Vizio SB3851-D0, Быстрый старт, Страница: 26 / 54

English - 26
Function LED Behavior Description
TV Remote
Press the Next/Previous button to enable/disable VIZIO TV Remotes. When en-
abled (On), you can use a VIZIO TV remote control to turn on the sound bar (using
the TV Volume Up button) and control volume.
Program Remote
−−
Press the Next/Previous and Play buttons to toggle and select and program
your TV remote to control the Volume Down, Volume Up, and Mute functions
on your sound bar. See the Program Remote section for more information.
Eco Power On/Off
Press the Next/Previous button to enable/disable Eco Power Mode. When enabled
(On), the sound bar will go into standby after a period of inactivity. The sound bar will
automatically turn off when no audio signal is detected. Off disables this feature.
Note: Enable this function if using a TV remote to control the sound bar or if you
would like to cast content with need to manually turn on the sound bar.
Speaker Test
—
Press the Play/Pause button to activate the speaker test function. A voice will
begin calling out each speaker beginning with left front. (Left Front, Center,
Right Front, Right Rear, Left Rear, and Subwoofer-white noise) If any of these
are
missing, check the connection and run the speaker test function again.
Link
Press the Next/Previous and Play buttons to select and confirm enabling or
disabling Link Mode on your sound bar. Link Mode allows the VIZIO SmartCast
App to reconnect the sound bar to Wi-Fi in the event of a lost connection or if a
new device is being paired.
Reset
−−
Press the Next/Previous and Play buttons to select and reset your remote and
sound bar to the factory default settings. All paired Bluetooth devices will be un-
paired. All programmed IR remotes will also be removed. See the Reset to Factory
Default Settings section for more information.
When a Dolby
Digital or DTS
signal is detected.
Dolby Digital and DTS are only available on either the Coaxial In or
Digital Optical Audio In inputs. When a Dolby Digital or DTS signal is detected,
the Dolby Digital (White) / DTS (Amber) indicator LED will light up for 5 seconds
before fading away.
Prg Remote
EcoPwr
VZtv Rmt On
TV Remote On
TV Remote Off
Eco Power On
Eco Power Off
Dolby Digital and DTS
Indicator LED
Spkr Test
Reset No
Link On
Single light with sound
upon confirmation