
English - 14
Front
Top
Back
Side
Angle
LED Indicators are located here.
The LED Indicators will behave differently with each button on the remote control.
Function
LED Behavior
Description
Input
Press the INPUT button on the remote to cycle through the available inputs:
•Analog Audio In - AUX Stereo RCA (1)
•Analog Audio In - AUX Stereo 3.5mm (2)
•Coaxial In - Digital (3)
•Digital Optical Audio In - Optical (4)
•Bluetooth
•USB In - USB (6)
Press and hold the INPUT button on the remote control for 3 seconds to
enable the auto input detect function.
Bluetooth
Pairing
Press and hold the button on the remote. The Sound Bar will be discoverable
for 15 minutes. You can now search for the Sound Bar (VIZIO SB3220) using your
Bluetooth Device. The sound bar will power down if no device is found.
Note: Set your Bluetooth device into pairing mode prior to the Sound Bar.
DTS
TruVolume
On/Off
Press the
TVOL button to enable/disable TruVolume.
When enabled (On), TruVolume provides a consistent and comfortable volume
level for a more enjoyable listening experience.
(When searching for device)
Flash from the bottom to the
top and back continuously.
TruVolume On
TruVolume Off
Analog Audio In - AUX (1)
Analog Audio In - AUX (2)
Coaxial In - Digital (3)
Digital Optical Audio In
Optical (4)
Bluetooth
USB In - USB (6)
LED INDICATORS