English - 12
TRA
Remove the battery cover by gently
sliding it away from the remote.
Insert the included batteries and gently
slide the battery cover back into place.
8
6
7
Turn on your TV and sound bar. The sound bar will announce
"Searching" and automatically begin searching for an active input.*
The LED indicator on the front of the sound bar will begin cycling
through inputs until an audio source is detected. Once an active
input has been found, the input name will be announced.**
You can press the
INPUT button to switch between audio sources.
For example, if you connected your TV to AUX , set the sound bar
to AUX .
Tip:
Pressing the
INPUT button will stop
the auto detect function.
*Occurs only during first-time set up.
**Auto detect function only occurs once when the sound bar is first powered on. To enable this feature again, you
must do a Factory Reset (see the Using Button Combinations section for more information) or press and hold the
INPUT button for 3 seconds.
When needed, VIZIO recommends replacing the batteries that came
with this remote with two, new Duracell ‘AAA’ alkaline batteries.
Input
Power
Top
Top
