19
6.4.1 Key Functions
(1)
SETUP -
This button starts all programming sequences.
(2)
Remote LED –
Blinks when the remote is being programmed or is sending a signal
to your Plasma Display.
(3)
POWER -
Press this key to turn the Plasma Display On
from Standby mode. Press it again to return to the
Standby mode.
(4)
TV –
This button selects a programmed TV. Pre-
programmed for the VIZIO P46 Plasma TV.
(5)
DVD –
This button selects a programmed DVD player.
(6)
VCR –
This button selects a programmed VCR.
(7)
TV2 –
This button selects a second programmed TV.
15
(8)
CBL/SAT –
This button selects a programmed cable TV set-top box or selects a
programmed satellite TV set-top box.
(9)
AMP –
This button selects a programmed amplifier.
(10)
CD –
This button selects a programmed CD player.
(11)
AUX –
This button selects a programmed component.
(12)
Number Button Pad –
These buttons select a channel or
password.
(13)
MUTE –
This button turns the sound on and off.
(14)
100/Enter –
This button enters a channel number greater
than 100 in TV mode. Works as an ENTER button in other
video modes.
(15)
VOL –
These buttons turn volume up or down.
(16)
LAST –
This button recalls the previously viewed channel.
(17) SLEEP
–
This button turns on the sleep timer for other V, Inc
devices.
NOTE: This button is NOT active for the VIZIO
P46 model.
(18)
INPUT –
This button changes the input source.
(19)
CH –
These buttons change the channels up or down.