Vizio Elevate P514a-H6, Руководство пользователя, Страница: 22 / 52

ENG - 22
Function LED Behavior Description
Speaker Test
—
SETUP > Spkr Test > OK to activate the speaker test function. A voice will begin calling out
each speaker beginning with left front (Left Front, Center, Right Front, Right Rear, Left Rear,
Left Front Height, Right Front Height, Right Rear Height, Left Rear Height and subwoofer-
white noise). If any of these are missing, check the connection and run the speaker test
function again.
VIZIO Remote
Remote On
SETUP > VZtvRmt > Use the Next/Previous buttons to enable/disable VIZIO TV
Remotes. When enabled (On), you can use a VIZIO TV remote control to turn on the sound
bar (using the
TV Volume Up button) and control volume.
Remote Off
Wi-Fi Setup
Single LED indicator
with sound
confirmation.
SETUP > WiFi Setup > Use the Next/Previous buttons to enable/disable Wi-Fi setup on
your sound bar. Press the
OK
button to select.
Wi-Fi setup allows the VIZIO SmartCast Mobile
™
app to reconnect the sound bar to Wi-Fi or
paired Bluetooth devices in the event of a lost connection or if a new device is being paired.
Elevate Height
Speakers
EFFECT > Elvate > Use the Next/Previous buttons to toggle between preset height modes.
When Up is selected, front height speakers will rotate up to provide an immersive movie
sound experience. When
Wide
is selected, the front height speakers will rotate forward (good
for listening to music). The
Auto
setting will adjust height speakers based on content.
Note: Default setting is up.
Surround Sound
EFFECT > Surnd > Use the Next/Previous buttons to enable/disable surround sound and
front or dual modes. When enabled (On), Dolby and DTS Surround content will produce full
5.1 sound. With stereo content, EQ Music will produce DTS Virtual:X enhanced sound and
EQ Movie will produce realistic 5.1 effect sound. When disabled (Off), the surround speakers
will be disabled and the sound bar will only produce DTS Virtual sound effect.
Dual - Both surround speakers will play the same left and right channel content as the
sound bar.
Note:
With stereo content, if EQ mode is set to Direct and Surround is set to Off, the sound
bar will output 2.1 audio without center or surround.
Mode & Level Settings
Spkr Test
WiFi Setup
Surnd
Elvate
VZtvRmt
Off
W
ide
D
ual
Au
to
On
Up