56
HOW TO USE
Using an optional Quick Release Panorama Clamp
1
Loosen the two thumbscrews and remove the camera mounting block from the
POLARIE U.
3
Replace with the clamp disc (lower portion of the Quick release panorama clamp)
and tighten it securely with two M6 cap screws.
4
Attach the plate holder (upper portion
of the Quick release panorama clamp)
to the clamp disc.
5
Now, ready to install a Quick release
angle plate or another plate according
to your needs.
2
Loosen three screws in the center hollow of the protruded portion of the POLARIE U
with the supplied Allen wrench of 2.5mm to remove the part of the protruded portion.
Two M6 cap screws appear.
The Quick release panorama clamp (sold separately) is attachable to the POLARIE U. It is compatible with attachment plates of the standard thin type.
Attach the Quick release panorama clamp with the following procedure.
Thumbscrew
Thumbscrew
Thumbscrew
Thumbscrew
Camera
Camera
mounting block
mounting block
2.5mm Allen wrench
2.5mm Allen wrench
M6 cap screw hole
M6 cap screw hole
5mm Allen wrench
5mm Allen wrench
Clamp disc
Clamp disc
Plate holder
Plate holder