Vixen FL55SS, Инструкция по эксплуатации

Страница: 5 / 8

D =
55mm
f=
300mm
Vixe
n Co.
,Ltd
. M
ADE
IN J
APA
N
5
SETTING UP THE TELESCOPE
The Finder bracket shoe is available for the 50mm Finder
Bracket II or XY Red Dot Finder II.
Finder Scope
Caution:Never use the screws that are provided the finder
bracket shoe. The long screws will exceed the allowable
depth of the thread and this could result in damage to the
drawtube.
Loosen both the dovetail plate lock screw and safety screw
until the tips of these screws no longer extended into the inner
part of the dovetail block.
Slide the dovetail slide bar M on the optical tube into the
dovetail mounting block as shown in the figure and tighten the
dovetail lock screw until snug. First tighten the dovetail lock
screw, and then tighten the small chrome safety screw.
Attaching the Optical Tube to a Mount
Be sure to use the two M4x12mm screws included in the package
of the FL55SS to attach the finder bracket shoe that is sold
separately.
Place the finder bracket shoe so that the sunken part on the
at t a c hment sur fa c e of the fin der br a c ket sho e fa c es the
eyepiece side of the FL55SS. Securely tighten the screws
with a Philipps head screw driver.
Attaching the Finder Bracket Shoe (Optional)
Dovetail
Slide Bar M
Sunken part
Sun
ken
Setscrew
Safety Screw
Lock Screw
Finder Bracket Shoe
(Optional)
Finder Bracket Shoe
Finder Bracket
(Optional)
M4x12mm screws
(two pieces)
Finder Setscrew
7X50mm Finder with illuminated
reticle (Optional)
The FL55SS and AP Mount are shown by way of example.
Refer to your mount instructions along with this manual.
The AP Mount is shown by way of example.
1
2