VXS7920
INSTALLATION GUIDE
PAGE 2 of 3
MOUNTING
CONTROL BOX
Find a mounting location in which you will have access to the buttons and connectors of the control box. Ideal
locations are driver compartment, firewall, under the seat.
IMPORTANT
: Do not mount the control box in the
engine compartment or in a place that will obstruct any of the
vehicle’s air bags deployment.
Mount the unit on the location chosen with the four screws provided.
SPEAKER
The ideal location for the speaker to be installed is a dry area inside your engine compartment where it will be
safe from exhaust and engine manifold heat.
To make the speaker firm and secure use the mounting bracket as a template to mark the holes location and
drill using a 1/8" drill bit.
Secure speaker with four self-tapping screws (not provided).
IMPORTANT
: The downward orientation of the speaker will prevent water to get inside.
ELECTRICAL CONNECTIONS
SPEAKER CABLE (GREEN)
: Route both cables through the fire wall of your vehicle to attach it to the
speaker previously installed in the engine compartment.
POWER CABLE (RED/BLACK)
: Connect the positive wire (Red) to a power source in the vehicle that only
gets power when the vehicle’s ignition is on. Recommended connection points are: windshield wiper motor,
blower motor or an accessory terminal on the fuse panel. Use a 5A fuse (not provided) on this connection for
circuit’s protection. Connect the negative wire (Black) to ground, any rust and paint free metal body bolt or the
negative (-) battery post.
LIGHTING CONTROL
: Yellow cable is connected to the 12V power source and White cable to the positive
terminal of your light (Repeat this step with the other Yellow and White cable if you are controlling a second
light).
VEHICLE HORN CONTROL
:
Connect the Blue cable to your vehicle’s horn switch if you want to control your
vehicle’s horn with the remote control.
