Vivotek Supreme SD8363E Скачать руководство пользователя страница 56

Страница: 56 / 216

VIVOTEK

56 - User's Manual

■

Back light compensation

: This option is only available when the Auto mode is selected for the

Exposure setting. This option enables light compensation for images that are too dark to recognize; for

example, for the dark side of objects that is posed against bright sunlight. This option is disabled if you

enable the WDR function.

■

WDR (Wide Dynamic Range)

: Default is off. When set to Auto, you can select the sensitivity and

strength of the WDR function. The Low, Medium, High options correspond to the level of contrast

between the overly-lit area and the shaded areas. For example, the High option applies to a high

contrast scenario. Note that when the exposure time is set to longer than 1/60 second, the WDR

function will be disabled.

The Sensitivity option applies to the response speed to the change in bright-to-dark lighting contrast.

If you prefer using the Manual setting, the Long exposure time (that for capturing the shaded area of

an image) is either automatically selected by firmware or using the exposure time you selected in the

Manual or Shutter Priority mode. On the other hand, the short exposure time is geometrically shorter

than the long exposure time to cover areas that are overly lighted. The higher the time decrease ratio

(64x max.), the shorter the exposure time.

•

When the

WDR

function takes effect, the frame rate will be halved. The WDR works by generating

an optimal image from out of two image frames, one taken with long exposure and the other shorter

exposure. When enabled, a 60fps stream will be delivered at half of the frame rate, i.e., 30 frames per

second.

NOTE:

•

When the

WDR mode

is set to

Manual

, the maximum multiplying power between the long and short

exposure time may not be as large as 64x. The configurable multiplying power can be smaller when the

long and the short exposure time are set to be close in numbers.

Long

exposure

Short

exposure

Multiplying

power

Long

exposure

Short

exposure

Multiplying

power

1/10000

1/180

1/10000

1/6000

1/10000

1/125

1/8000

1/4000

1/10000

1/100

1/6400

1/3000

1/10000

1/90

1/5670

1/2000

1/10000

1/60

1/3840

1/1500

1/10000

1/30

1/1920

1/1000

1/10000

1/15

1/960

1/725

1/10000

1/8

1/512

1/500

1/10000

1/4

1/256

1/350

1/10000

1/2

1/128

1/250

1/10000

1/1

1/64

Содержание Supreme SD8363E

























































































































































































































Результаты поиска

Содержание Supreme SD8363E

Отзывы:

Бренды по названию

Популярные бренды

Vivotek Supreme SD8363E, Руководство пользователя

Результаты поиска

Содержание Supreme SD8363E

Отзывы:

Бренды по названию

Популярные бренды