background image

 

 

VIVOTEK - Built with Reliability

 
40 - User's Manual

6. How do I move to another layout page? 

Move your cursor to the right hand side of your screen. The page turner buttons will appear as 

shown below.  

For example, if you have 8 cameras placed on 2 2x2 layout pages, use these buttons to visit 

different pages. 

7. Why the onscreen tool bars disappear after some time? 

The system comes with idle modes. Below are the applicable conditions:

1. 

Live view:

 if no management activities occur for 5 seconds, the tool bars disappear from 

screen. When in the idle mode, mouse cursor and tool bars will disappear. Moving the mouse 
cursor will re-activate the screen. 

2. 

Settings page

: If left unattended for 10 minutes, system will automatically log out. The 

system will prompt for user credentials if a user tries to access the Settings page again. 

3. 

Search recording clips

 window: If currently there is a video playback, the system will not 

enter the idle mode.

 

Содержание ND9441P













































































































































































Отзывы: